Portfolio

Description.

Energy-Efficient MVR Evaporation Plant for Norsk Spesialolje

Energy-Efficient MVR Evaporation Plant for Norsk Spesialolje Project Overview Client: Norsk Spesialolje ASDelivered by: AMOF Fjell Process Technology ASApplication: Wastewater Concentration and Volume ReductionTechnology: MVR (Mechanical Vapor Recompression) + Heat RecoveryLocation: NorwayDelivery: 2025Capacity: 5.5 tonnes evaporated water per hour AMOF Fjell Process Technology AS is proud to have delivered a complete turn-key evaporation plant to Norsk Spesialolje AS – our second installation for this forward-thinking client. The plant is designed to concentrate industrial wastewater by removing water and thereby reducing the total waste volume by a ratio of 12:1. This significantly reduces disposal costs and environmental impact. Technology and Sustainability

Energy-Efficient MVR Evaporation Plant for Norsk Spesialolje Read More »

Hima Seafood – Aquaculture Sludge Drying & Heat Recovery

Hima Seafood – Aquaculture Sludge Drying & Heat Recovery AMOF Fjell Process Technology AS is proud to have delivered the drying and energy recovery systems for the advanced sludge treatment plant at Hima Seafood’s new RAS facility in Rjukan. Developed in close collaboration with Sterner AS, this project marks an important step towards more sustainable land-based aquaculture. With an ambition to produce 9,000 tons of trout annually in a responsible and eco-friendly way, Hima Seafood has invested in state-of-the-art technology based on Recirculating Aquaculture Systems (RAS) – significantly reducing water usage through continuous purification and reuse. Customer: Sterner AS /

Hima Seafood – Aquaculture Sludge Drying & Heat Recovery Read More »

Turning Fish Waste into Energy – A Sustainable Success

Turning Waste into Energy – A Sustainable Success Client: Ignis Bio EnergyDelivered by: AMOF Fjell Process Technology ASApplication: Sludge Dewatering, Drying & Energy RecoveryIndustry: Renewable Energy & AquacultureLocation: Norway Project Overview AMOF-Fjell Process Technology delivered an integrated sludge dewatering and thermal drying system for Ignis Bio Energy, supporting an innovative waste-to-energy solution connected to Gaia Salmon’s aquaculture facility in Norway. The installation converts sludge from aquaculture operations into a dried fuel suitable for energy recovery through combustion. By integrating mechanical dewatering, thermal drying and heat recovery, the system reduces sludge moisture content while preparing the material for energy production. Sludge Dewatering and

Turning Fish Waste into Energy – A Sustainable Success Read More »

Fishmeal and oil plant onboard HAVFISK AS, Gadus Njord

Onboard Fishmeal Plant Upgrade for Gadus Njord – Doubling Processing Capacity We at AMOF Fjell Process Technology AS are grateful to be allowed to deliver our facility no. 19 on board HAVFISK AS boat Gadus Njord.The delivery means that Gadus Njord will double the capacity of the current plant and get better utilisation of the residual raw material taken on board. We delivered the first system on board in 2014, and are proud that the customer once again chooses AMOF Fjell Process Technology AS as a supplier for their upgrade. The end products have a significant potential for value creation,

Fishmeal and oil plant onboard HAVFISK AS, Gadus Njord Read More »

Large AF-TD600+ dryer delivered to Grøntvedt Nutri AS

AF-TD600+ Industrial Disc Dryer Delivered to Grøntvedt Nutri Client: Grøntvedt Nutri ASLocation: Uthaug, NorwayDelivery: 2024Equipment: AF-TD600+ Thermal Disc DryerHeating Surface: More than 600 m²Equipment Weight: Approximately 92 tonnesApplication: Land-Based Fishmeal Production Project Overview In 2024, AMOF-Fjell Process Technology delivered one of its largest thermal disc dryers, the AF-TD600+, to Grøntvedt Nutri AS in Norway. The dryer was supplied as part of a major capacity upgrade at the customer’s existing fishmeal and fish oil processing facility.With a heating surface exceeding 600 m² and a weight of approximately 92 tonnes, the AF-TD600+ represents a substantial industrial equipment delivery. Delivery and Installation Due to

Large AF-TD600+ dryer delivered to Grøntvedt Nutri AS Read More »

Compact fishmeal plant delivered to Havborg’s new freezer trawler

CFP-70 Compact Fishmeal Plant Delivered to Emerald Freezer Trawler 70 tonnes/day of onboard fish residual raw material processing – successfully commissioned by AMOF-Fjell. AMOF-Fjell Process Technology has successfully delivered and commissioned a CFP-70 Compact Fishmeal Plant onboard Emerald, the new Arctic freezer trawler owned by Faroese fishing company P/F Havborg. Designed to process up to 70 tonnes of fish residual raw materials per day, the plant converts valuable fish by-products into fishmeal and fish oil directly onboard the vessel. The trawler was designed by Skipsteknisk (ST-119) and constructed at Tersan Shipyard in Turkey.Completed in 2023, the commissioning marked an important milestone

Compact fishmeal plant delivered to Havborg’s new freezer trawler Read More »

Compact Fishmeal Plant CFP-60 delivered to VARD fish trawler

Compact Fishmeal Plant CFP-60 Delivered to VARD-Designed Trawler 60 tonnes per day of fish residual raw material converted into valuable fishmeal and fish oil. AMOF-Fjell Process Technology has successfully delivered and commissioned a CFP-60 Compact Fishmeal Plant onboard a new stern trawler for Luntos Co. Ltd. The vessel was designed by VARD (Design 8 04) and constructed at Vard Vung Tau in Vietnam. With a processing capacity of 60 tonnes of residual raw material per day, the plant is designed to convert fish heads, viscera, trimmings and other processing residues into valuable marine proteins and fish oil. The delivery represents AMOF-Fjell’s

Compact Fishmeal Plant CFP-60 delivered to VARD fish trawler Read More »

Replacement dryer rotor for a compact fishmeal plant delivered in 2002

Replacement dryer rotor Replacement dryer rotor for a compact fishmeal plant delivered in 2002. Delivery: February 2022 Land: New Zealand AMOF-Fjell delivers spare parts for all of our dryers, cookers and presses. This rotor has been running since 2002, and needed replacement. Our disc design on all of our dryers are made in a way that greatly reduces number of welds. We do not have welds on the discs, only on the perimeter of the outer circle of the disc. The discs are hold together with special clamps that is welded inside before mounting. This gives the rotor less weak points.

Replacement dryer rotor for a compact fishmeal plant delivered in 2002 Read More »

AMOF-Fjell delivered a complete crab meal processing plant to NutriShell in 2021

Crab meal processing plant AMOF-Fjell delivered a complete crab meal processing plant to NutriShell in 2021. The factory is located beside the factory of Hitramat (Europes biggest crab processing plant). Raw material is processed directly after Hitramat’s process (super fresh) and results in a high-quality product. The plant delivered by AMOF-Fjell processes crab shell and proteins by drying, milling and packing in big bag. The video shows dried crab shells on dryer outlet conveyor, and are transported into our milling plant for further processing. Dried and coarsely grinded crab shells. News

AMOF-Fjell delivered a complete crab meal processing plant to NutriShell in 2021 Read More »

Scroll to Top

Contact AMOF-Fjell

Tell us about your project or inquiry

This field is for validation purposes and should be left unchanged.
Name
Company(Required)